Structure for housing electronic equipment. Differing definitions exist between the computing industry and the telecommunications industry
* Computing industry: A rack is an enclosed cabinet housing computer equipment. The front and back panels may be solid, perforated, or open depending on the cooling requirements of the equipment within
* Telecommunications industry: A rack is a framework consisting of two vertical posts mounted to the floor and a series of open shelves upon which electronic equipment is placed. Typically, there are no enclosed panels on any side of the rack
Glossary - R
This is a glossary of older terms. While many of the definitions are unchanged, some of the definitions may be out of date and some of the terms may no longer be in use in the Data Center industry. This legacy glossary provides definitions for hundreds of information and communications technology (ICT) and data center terms and acronyms. Arranged alphabetically and searchable, the glossary explains common industry vocabulary.
Rack (from ASHRAE, industry)
Rack (from ASHRAE)
Frame for housing electronic equipment
Rack Power
Used to denote the total amount of electrical power being delivered to electronic equipment within a given rack. Often expressed in kilowatts (kW), this is often incorrectly equated to be the heat dissipation from the electrical components of the rack
Rack-mounted Equipment
Equipment that is to be mounted in an EIA (Electronic Industry Alliance) or similar cabinet. These systems are generally specified in EIA units, such as 1U, 2U, 3U, etc., where 1U = 1.75 inches (44 mm)
Rack, Air- and Liquid-cooled
Rack that requires both air and liquid provided by the building
Rack, Air-cooled
System conditioned by removal of heat only using air
Rack, Liquid-cooled
A liquid-cooled rack that accepts conditioned coolant; system conditioned by removal of heat using a liquid
RAID Controllers
A component type of data center class server. Source: Intel
Raised Floor (from ASHRAE, industry)
Also known as access floor. Raised floors are a building system that utilizes pedestals and floor panels to create a cavity between the building floor slab and the finished floor where equipment and furnishings are located. The cavity can be used as an air distribution plenum to provide conditioned air throughout the raised floor area. The cavity can also be used for routing of power/data cabling infrastructure
Raised Floor (from ASHRAE)
A platform with removable panels where equipment is installed with the intervening space between it and the main building floor used to house the interconnecting cables, which at times is used as a means for supplying conditioned air to the information technology equipment and the room
Random Access Memory (RAM)
A configuration of memory cells that hold data for processing by a computer's processor. The term random derives from the fact that the processor can retrieve data from any individual location, or address, within RAM
Rated Current
The rated current is the absolute maximum current that is required by the unit from an electrical branch circuit
Rated Frequency
The supply frequency as declared by the manufacturer
Rated Frequency Range
The supply frequency range as declared by the manufacturer expressed by its lower and upper rated frequencies
Rated Voltage
The supply voltage as declared by the manufacturer
Rated Voltage Range
The supply voltage range as declared by the manufacturer
RC-class
Room-cooling class
RDHX
Rear door heat exchanger, a classification type of data center cooling for high heat density air cooling. Source: NVIDIA
RDIMM
Registered memory DIMM. Source: ASHRAE
Rear Door Heat Exchanger (RDHx)
A specialized IT Cabinet rear door with a built-in heat exchanger that uses a radiator where the hottest servers are operating. chills the hot air from the back of the servers and cools it immediately. The chilled door contains fans and a coolant. The coolant absorbs the heat, returning cooler air to the data center. Source: Supermicro
Redfish
Standard designed to deliver simple and secure management for converged, hybrid IT and the Software Defined Data Center (SDDC). Both human readable and machine capable, Redfish leverages common Internet and web services standards to expose information directly to the modern tool chain. Source: DMTF
Redundancy (from ASHRAE)
"N" represents the number of pieces to satisfy the normal conditions. Redundancy is often expressed compared to the baseline of "N." Some examples are "N+1," "N+2," "2N," and 2(N+1). A critical decision is whether "N" should represent just normal conditions or whether "N" includes full capacity during off-line routine maintenance. Facility redundancy can apply to an entire site (backup site), systems, or components. IT redundancy can apply to hardware and software
Reference Time
The amount of time that a particular benchmark took to run on a specific reference platform
Refrigerants
In a refrigerating system, the medium of heat transfer that picks up heat by evaporating at a low temperature and pressure and gives up heat on condensing at a higher temperature and pressure
Relative Humidity (RH)
* Ratio of the partial pressure or density of water vapor to the saturation pressure or density, respectively, at the same dry-bulb temperature and barometric pressure of the ambient air
* Ratio of the mole fraction of water vapor to the mole fraction of water vapor saturated at the same temperature and barometric pressure at 100% relative humidity, the dry-bulb, wet-bulb, and dew-point temperatures are equal
Releasing Panel
A particular fire alarm control panel whose specific purpose is to monitor fire detection devices in a given area protected by a suppression system and, upon receiving alarm signals from those devices, actuate the suppression system
Reliability
The degree to which the result of a measurement, calculation, or specification can be depended on to be accurate. Source: Oxford Languages
Reliability (from ASHRAE, industry)
Reliability is a percentage value representing the probability that a piece of equipment or system will be operable throughout its mission duration. Values of 99.9 percent (three 9s) and higher are common in data and communications equipment areas. For individual components, the reliability is often determined through testing. For assemblies and systems, reliability is often the result of a mathematical evaluation based on the reliability of individual components and any redundancy or diversity that may be employed
Reliability (from ASHRAE)
A percentage value representing the probability that a piece of equipment or system will be operable throughout its mission duration. Values of 99.9% (three 9s) and higher are common in data and communications equipment areas. For individual components, the reliability is often determined through testing. For assemblies and systems, reliability is often the result of a mathematical evaluation based on the reliability of individual components and any redundancy or diversity that may be employed
Remote Power Panel (RPP)
A term typically used to describe electrical panels outside of electrical equipment rooms
Reporting Rules
The set of benchmark rules that defines what constitutes a valid full disclosure for that benchmark. Usually these define what parts of the benchmark configuration and the system configuration(s) that need to be detailed and disclosed
Response Time
The amount of time from when an action is requested until the time that the request completes and is returned to the requestor
Result
The value of the primary metric being reported for the benchmark
Return Air (RA)
See air, return
RHI
Return Heat Index
RISE
Responsible, inclusive, and sustainable world, enabled (through technology). Source: Intel
Riser
A vertical pipe in a building
Risk
The potential for adverse consequences where something of value is at stake and where the occurrence and degree of an outcome is uncertain. In the context of the assessment of climate impacts, the term risk is often used to refer to the potential for adverse consequences of a climate-related hazard, or of adaptation or mitigation responses to such a hazard, on lives, livelihoods, health and well-being, ecosystems and species, economic, social, and cultural assets, services (including ecosystem services), and infrastructure. Risk results from the interaction of vulnerability (of the affected system), its exposure over time (to the hazard), as well as the (climate-related) hazard and the likelihood of its occurrence. Source: IPCC
Room Load Capacity
The point at which the equipment heat load in the room no longer allows the equipment to run within the specified temperature requirements of the equipment. The load capacity is influenced by many factors. The primary one is the room's theoretical capacity. Other factors, such as the layout of the room and load distribution, also influence the room load capacity
Room Theoretical Capacity
The capacity of the room based on the mechanical room equipment capacity. This is the sensible tonnage of the mechanical room for supporting the computer or telecommunications room heat loads
Rotary Heat Exchanger
See exchanger, rotary heat
Rotary UPS
See UPS, rotary
Router
A layer 3 interconnection device that appears as a media access control (MAC) to a CSMA/CD collision domain (see IEEE Std 610.7-1995 [B38])
Run Rules
The set of benchmark rules that defines what constitutes a valid test with that benchmark. Usually these define legal configurations, experimental limitations, and any operating constraints